INSTRUCTIONS TO AUTHORS
Scope and policy
JOURNAL OF SOIL SCIENCE AND PLANT NUTRITION is a journal of the Chilean Society of Soil Science that since 2010 publishes four issues per year. For publication it accepts original research papers, technical notes, and reviews (both voluntary and by invitation) on all aspects indicated by the journal’s title. Electronic versions of published articles are available from http://www.jsspn.cl and https://scielo.conicyt.cl providing free access to a broad international audience. Since the second semester of 2010, the Journal’s official language is English.
Contributions to soil science cover physics, chemistry, biology, mineralogy, ecology, pedology, classification, amelioration, fertility and protection.
Topics on plant nutrition include mineral metabolism, biotechnology, rhizosphere, and molecular ecology, physiology of yield development, impact of organic and mineral fertilization on plant yield and quality.
Papers on subjects related to soil science, such as quaternary geology, geomorphology, hydrology and landscaping, together with contributions to problems of natural conservation and environmental protection are also welcome.
All articles sent for publication will be examined by
the Editorial Board and should comply with the aims and scope of the journal.
Submitted articles will be sent for critical review to a minimum of two
specialists chosen by the Editorial Board who reserve the right to publish
or reject articles in accord with the recommendations by the reviewers.
Form and preparation of manuscripts
Authors are requested to submit manuscripts electronically. We strongly suggest that authors carefully check the final version of their manuscripts for compliance with the format and style of the journal. In order to simplify journal production and minimize the number of errors, the final draft of the paper (once accepted by the Editorial Board) should be submitted as an electronic file created by a word processor. Likewise, authors are urged to send figures, photographs, graphs, and tables electronically, using programs that generate interchangeable formats (Corel Draw, Excel, Canvas, Freelance, etc.). Authors should indicate the program used to prepare text, figures, graphs, tables, etc.
Manuscripts must be written in English. Please make sure that English usage and grammar are correct.
3. ORGANIZATION OF MANUSCRIPT
Authors are requested to follow the instructions given below:
Manuscripts must be typed in Times New Roman, 12 cpi, with one and half spacing throughout (including footnotes, references, tables and legends) on paper not exceeding 30 cm in height, and a 2.5 cm wide margin on all four sides (left, right, top, bottom). One and a half spacing is equivalent to a maximum of 35 lines per page. All pages must be numbered in right bottom margin. The manuscript must be presented with numbered lines.
3.2 Size of manuscript
Manuscript should not exceed 30 typewritten pages, including
figures and tables. Short communications and technical notes are limited
to six type written pages including illustrations.
Manuscript should be presented in the following order: Title, name(s) of the author(s), complete address/affiliation and e-mail address of the corresponding author, Abstract, Keywords, Introduction, Materials and Methods, Results, Discussion, Conclusions, Acknowledgements and References.
3.3 Manuscript layout
The first page of manuscript should contain the following items in the sequence given below:
3.4 Division of the text
Manuscripts should be divided into sections and subsections by headings and subheadings up to a maximum of three levels. To differentiate them, CAPITAL BOLD LETTERS should be used for the first order titles, bold lower case letters for the second order, and italic bold lower case letters for the third order. Titles of sections and subsections should begin at the left-hand margins, followed by the first paragraph with one blank space. From the second paragraph in each section, the line to start a new paragraph should be indented.
The names of plant and animal species should be given in italics; for example, Zea mays.
3.5 Quantities, units, abbreviations, nomenclature
Only SI quantities and units should be used (SI = Le Système International d'Unités). If data with non-SI units are reported, they should be put in parentheses behind the corresponding data with SI units. Symbols and abbreviations used to represent variables, constants, quantities, properties, etc. must be defined in the text at their first occurrence.
Every table must be referred to in the text. Tables are to be numbered with Arabic numerals in the sequence in which they appear. They should be typed on separate pages (one page per table) at the end of the manuscript. In the text, the position at which a table appears, should be marked by (Table ... ) in the middle of the page as an extra line. Every table must begin with a caption that starts with, for example, “Table 3…”. The caption must explain in detail the contents of the table. Tables must be presented in such a way that they can be read and understood without reference to the text.
The size of the tables should be such that they can be reproduced directly after reduction to a width of 85 mm. Tables of larger size (horizontally page) can be printed only in exceptional circumstances.
Every column and line in a table must be labeled explicitly and the appropriate units must be indicated. References to tables must be handled in the same way as those in the text. Footnotes for tables should be indicated by lower-case letters in parentheses and typed directly under the table.
3.7.1 General remarks
Every figure must be referred to in the text. Figures will be printed in black and white. If special circumstances demand the use of color, the associated costs must be covered by the authors.
The size of figures must not exceed the size of the manuscript page. Figures should be typed on separate pages (one page per figure) at the end of the manuscript. All figures should be numbered with Arabic numerals, and in the sequence in which they are cited in the text. The position at which a figure appears in the text must be marked by (Figure ... ) as an extra line.
Every figure must be accompanied by a legend which immediately follows the figure number: “Figure 5…”. Figure legends must contain sufficient explanatory details for their comprehension without reference to the text. Captions of figures should be written on a separate sheet. In the final impression caption will be placed below the corresponding figures.
Particular care should be taken to make sure that the data shown in figures are explicitly labeled with regard to the units used, and that the accompanying legends provide adequate information about the conditions under which the data were obtained.
The quality of the figures must be such that they can be reproduced directly after reduction to a width of 85 mm. Figures of larger size can be printed only in exceptional cases. Numbers, letters, and symbols in the figures must be large enough to be still 1.5 mm high after reduction to the printed format.
Regardless of the application use, when your electronic artwork is finalized, please “save as” or convert the images to one of the following formats (note the minimum resolution requirements). Figures must be saved in separated sheets in the following format: JPG of 300 dpi or TIFF of 300 dpi. Do not supply files that are optimized for screen use (like GIF, BMP, PICT, WPG), the resolution is too low.
As this journal is printed in black and white, the use of color or gray tones should be avoided in figures. For bar graphics, please use different lines or fillings to differentiate them, and when presenting curves, please use well-differentiated lines. If letters or other markers/symbols are to be inscribed, it is advisable to use large-size letters. Always use uniform lettering and font size (Times New Roman 12 cpi, as in the entire text).
Diagrams must be submitted as original drawings of excellent quality. Photographs or photocopies of drawings are in general not suitable for reproduction. Special symbols used should be explained in the diagram itself rather than in the legend, as such symbols may not appear in, or be lost during typesetting.
Halftones should have a minimum resolution of 300 dpi. For combination of artworks (e.g. halftones containing line drawing, extensive lettering, color diagrams, etc) a minimum resolution of 600 dpi should be used. TIFF, JPG, PDF, MS Office files (Word, PowerPoint, Excel) can be used in figures. Images should approximate the desired size of the printed version. Color reproductions are free of charge for online publication. The cost of incorporating color photographs or graphs in the printed version is payable by the author(s).
3.8 Structural diagrams and mathematical equations
Structural diagrams of molecules as well as mathematical equations should be drawn or written at the appropriate places in the manuscript in an extra line. Equations should be denoted by Arabic numerals (in parenthesis) toward the right-hand margin.
Acknowledgements of financial support, advice, and other kinds of assistance should be made at the end of the paper under the heading "Acknowledgements".
Citations in the main text should be given by the surname and year of publication. For example, McDonald (1962), Vera and Luzio (1987), Ellies et al. (1995; 1999) or: (McDonald, 1962; Vera and Luzio, 1987; Ellies et al., 1995; 1999).
The manuscript should be carefully checked to ensure that the spelling of authors' names and dates are exactly the same in the text as in the reference list.
References should be listed in alphabetical order, and collected in a separate sheet at the end of the text. The final reference list should show the name of the author(s) followed by the year of publication, full title of article or book, journal name, volume and page numbers, as indicated below.
3.10.1 Journal articles
Van Ranst, E., Utami, S. R., Vanderdeelen, J., Shamshuddin, J. 2004. Surface reactivity of Andisols on volcanic asho along the Sunda arc crossing Java Island, Indenosia. Geoderma 123, 193-203.
Alfaro, M. A., Salazar, F. S., Oenema, O., Iraira, S., Teuber, N., Ramirez, L., Villarroel, D. 2009. Nutrients balances in beef cattle production systems and their implications for the environment. J. Soil Sci. Plant Nutr. 9, 40-54.
3.10.2 Unpublished work
Papers that are unpublished but have been accepted must be cited with the journal's name followed by (in press). In all other cases, reference must be made to (unpublished work) or (personal communication).
3.10.3 Books and monographs
Tertian, R., Claisse, F. 1982. Principles of Quantitative X-Ray Fluorescence Analysis. Heyden, London, 385 p.
Hartge, K. H., Stewart B. A. 1995. Soil Structure: Its Development and Function. Advances in Soil Science. CRC Lewis Publishers, Boca Ratón, FL, 424 p.
3.10.4 Chapters from multi-author books
Wold, S., Sjöström, M. 1977. Chemometrics, Theory and Application. In: B. R. Kowalski (ed). ACS Symposium Series Nº 52. American Chemical Society, Washington, DC, pp: 243–282.
Oades, J. M. 1989. An introduction to organic matter in mineral soils. In: J. B. Dixon, S.B. Weed (eds). Minerals in Soil Environments, Second Edition. Soil Science Society of America, Madison, WI, pp: 89-159.
Hassink, J. 1995. Organic matter dynamics and N mineralization in grassland soils. Doctoral thesis, Wageningen University, The Netherlands, 250 p.
Miller, B.O. 1952. U.S. Patent 2542356, Dow Chemical Company; Chemical Abstracts 51 (1961) 2870.
The corresponding author will receive a proof to correct printer's errors. Changes cannot be made to the proof without the authorization of the editorial office of the journal.
Corrected proof should be returned within 5 days by e-mail. In case of failure to comply with this deadline, the Editor in-Chief will decide whether to publish the article without corrections (declining responsibility for errors, which may remain) or to be considered as new submission.
The corresponding author will be supplied with the final PDF file and the volume issue where the paper appears. The issue will be send by regular mail to the corresponding author.
The Chilean Society of Soil Science, as joint publishers of the journal, reserves all rights for the complete or partial reproduction of the materials published in Journal of Soil Science and Plant Nutrition. The right to reproduce material that is subject to copyright must be obtained from the authors, who should notify to the editorial office of Journal of Soil Science and Plant Nutrition.
Manuscript submission and correspondence
Manuscript submission is via e-mail. Submission must be addressed to:
All correspondence should be addressed to:
[About the journal] [Editorial board] [Subscription]
Sociedad Chilena de la Ciencia del Suelo
Temuco - Chile
Tel.: (56-45) 2325 467
Fax: (56-45) 2325 053