SciELO - Scientific Electronic Library Online

 
vol.25 número3Efectos del clima y capacidad de almacenamiento de agua del suelo en la productividad de rodales de pino radiata en Chile: un análisis utilizando el modelo 3-PGEficiencia del uso del agua en plantaciones de Pinus radiata en Chile índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

Compartir


Bosque (Valdivia)

versión On-line ISSN 0717-9200

Resumen

AGUILERA, ALFREDO  y  VEGA, MARIO. Effect of a change in machining conditions on surface roughness of Pinus radiata, D. Don . Bosque (Valdivia) [online]. 2004, vol.25, n.3, pp.25-32. ISSN 0717-9200.  http://dx.doi.org/10.4067/S0717-92002004000300003.

The effect of the machining conditions on the resulting surface roughness during the milling process of radiata pine was studied. The consumption of power whilst cutting was monitored, and in addition the angle of the fiber of the test specimens was varied to observe the effect on the surface quality. The results contribute to the knowledge of the machining conditions for this species and are of great commercial interest. The influence of both the feed and rotation speed on the product quality are clear. The relationship of these speeds, considered with the depth of cut and the cutting tool diameter (constants in this case), permit a definition of chip thickness as a key factor in the determination of quality and power consumption in the process. The values relating to the angle of fibers confirm that an increase in the angle causes a pronounced deterioration in the quality, and that this correlated well with the chip thickness.

Palabras clave : Machining; surface roughness; radiata.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons