SciELO - Scientific Electronic Library Online

 
vol.38 número1Efecto Antiangiogénico del Ácido Cafeico y Pinocembrina en el Proceso de Angiogénesis Fisiológica de Fetos de PolloSoftware de Navegación 2D y PDF en 3D del Oído Canino Basado en Imágenes Seccionadas en Color Real índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


International Journal of Morphology

versión On-line ISSN 0717-9502

Resumen

CRUZ-ELIZONDO, Miguel Angel de Jesús et al. Safety Ranges in V3 Segment of the Vertebral Artery for Surgical Procedures at the Craniocervical Junction. Int. J. Morphol. [online]. 2020, vol.38, n.1, pp.140-146. ISSN 0717-9502.  http://dx.doi.org/10.4067/S0717-95022020000100140.

The aim of this study was to establish safety ranges for the third vertebral artery segment (V3) for craneocervical procedures. Injury to V3 represents a potentially catastrophic complication. Its tortuous path and complex relationship with neighboring structures, increasing the risk. Ten male adult cadavers (20 vertebral arteries) with arterial infiltration of red latex were studied. The length, angles and anatomical measurements were obtained between the selected surgical landmarks and the portions of V3 segment. The horizontal portion has a length of 32.7 ± 3.6 mm with an angulation of 115.1 ± 8.3 degrees. The mean distances of the horizontal portion were: from the midline to the V3 groove of C1 posterior arch (24.7 ± 6.3 mm); from C1 pars interarticularis to the V3 distal loop of V3 (8.9 ± 1.4 mm). The vertical portion has a length 32.5 ± 5.6 mm with an angulation of the proximal loop of 113.6 ± 5.8 degrees. The mean distances between the C2 spinous process to the medial surface of the distal loop (43.8 ± 4.2 mm); from the C1-C2 joint to the V3 vertical portion (9.5 ± 1.5 mm); from C2 pars interarticularis to V3 in the C2 transverse foramen (6.5 ± 3.4 mm); from C2 pars interarticularis to V3 in the C1 transverse foramen (17.5 ± 4.5 mm). We reported four potential sites where V3 can be injured during four different surgical procedures: exposure of the posterior arch of C1, and pars interarticularis of C1 in the horizontal portion and exposure of the C1C2 joint, and placement of C1-C2 transarticular screws one in the vertical portion. We provide measurements of redundancy and safety ranges to reduce the risk of injury to the V3 segment during craniocervical surgical procedures.

Palabras clave : Anatomy; Vertebral artery; V3 segment; Cervical spine; Spine surgery.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )