SciELO - Scientific Electronic Library Online

 
vol.63 número4MICROENCAPSULATION OF OXOLINIC ACID WITH CHITOSAN BEADSEFFECT OF CHEMICAL AND PHYSICAL VARIABLES IN THE PHOTO-ELECTROCHEMICAL REMOVAL OF ESTRIOL (E3) AND 17 α-ETHINYLESTRADIOL (EE2) IN AQUEOUS SOLUTION índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Journal of the Chilean Chemical Society

versión On-line ISSN 0717-9707

Resumen

TUNDIDOR-CAMBA, Alain et al. SYNTHESIS, CHARACTERIZATION AND FILM PREPARATION OF NEW CO-POLYIMIDE BASED ON NEW 3,5-DIAMINO- N -(PYRIDIN-4-YLMETHYL)BENZAMIDE, ODA AND 6FDA. J. Chil. Chem. Soc. [online]. 2018, vol.63, n.4, pp.4239-4249. ISSN 0717-9707.  http://dx.doi.org/10.4067/S0717-97072018000404239.

This work describes mainly the synthesis and characterization of new co-polyimides obtained from the polycondensation of the dianhydride 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA), 4,4′-oxydianiline (ODA) and the new diamine 3,5-diamino- N -(pyridin-4-ylmethyl)benzamide (PyDA). It describes as the different compositions of ODA and PyDA present in the polymers, produce variation on thermal and mechanical properties, which are important characteristics for the development of future nanocomposites derived from these polymers. Both PyDA monomer and polymers were characterized using FT-IR and NMR (1H, 13C, 19F, dept 135°, COSY, HMBC, HMQC) spectroscopy. The inherent viscosity of polymers is between 0.3 to 1.49 dL/g, they are soluble in aprotic polar solvents, such as: DMSO, DMF and DMA. In addition, all co-polymers showed thermal decomposition temperature and glass transition temperatures above 483 °C and 289 °C, respectively. Mechanical tests under tension of co-polymer films showed Young's modulus between 2.1-3.9 GPa and tensile strength between 35.5 and 120.0 MPa. On the other hand, an increase in crystallinity and hydrophilicity is observed when increasing the amount of pyridinyl groups.

Palabras clave : aromatic co-polyimides; pendant amide; pyridinyl pendant group.

        · texto en Inglés     · Inglés ( pdf )