SciELO - Scientific Electronic Library Online

vol.16 issue3Numerical Problems in the Fatigue Crack Closure Determination using Finite Element AnalysisInteractive Program for Modeling and Determining the Dynamic Characteristics of Rotating Systems author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand




Related links


Información tecnológica

On-line version ISSN 0718-0764


RODRIGUEZ, J.M.; COLIN, J.; PORCAYO, J.  and  LOPEZ, M.I.. Evaluation of the Velocities Required for the Deposition of FeSi and MoS2 on SAE 4140 and AISI 304 Steels by Triboadhesion. Inf. tecnol. [online]. 2005, vol.16, n.3, pp.21-28. ISSN 0718-0764.

In this work a theoretical and experimental evaluation of the velocities required to deposit FeSi and MoS2 on SAE 4140 and AISI 304 steels is presented. To achieve this goal, the friction factor between the cotton mop and the base material was determined. The deposition process by triboadhesion is caused by the heat generated by friction between the cotton mop and the base material. During the friction, the contact between these two elements generates high instant temperatures. In the study, it was experimentally demonstrated the deposition of the material, using the tangential velocity obtained from a theoretical analysis.

Keywords : triboadhesion; heat generation; friction; deposition; tribology.

        · abstract in Spanish     · text in Spanish


Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License