SciELO - Scientific Electronic Library Online

 
vol.16 número4Efectos Dinámicos de los Elementos Activos de los Manipuladores en la Resolución del Problema Dinámico InversoUso del Parámetro de Redondez para Evaluar la Cavitación Intergranular en un Acero de bajo Carbono Microaleado con Niobio Deformado Isotérmicamente índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

Compartir


Información tecnológica

versión On-line ISSN 0718-0764

Resumen

HURTADO, E.; GARNICA, P.  y  LOPEZ, A.. Application of the Bradawling Test to Low Carbon Niobium Microalloyed Steel. Inf. tecnol. [online]. 2005, vol.16, n.4, pp.39-44. ISSN 0718-0764.  http://dx.doi.org/10.4067/S0718-07642005000400007.

The mechanical and microstructural characteristics of isothermal plastic deformation were determined on cylindrical samples of niobium microalloyed steel tested at high temperatures. Test temperatures were 840°C, 900°C and 960°C at crosshead speeds of 1.3 mm/min, 4.5 mm/min and 13 mm/min to a penetration depth of 8 mm. Greater resistance of the material was observed at  960°C than at 900°C and 840°C. This was related to the intergranular precipitation of niobium carbonitrides and austenite recrystallization inhibition. The bradawling test is sensitive to both recrystallization and precipitation. It is shown that the method used is a triaxial stress state test, highly symmetrical with a simple geometry, and therefore may be used as a test complementary to heated uniaxial torsion and compression testing .

Palabras clave : metal testing; microalloyed steel; hot deformation; bradawling test; awl; indentation.

        · resumen en Español     · texto en Español

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons