SciELO - Scientific Electronic Library Online

 
vol.16 número6Resistencia al Impacto y a la Tracción de Materiales Compuestos Plástico-MaderaSimulación del Proceso de Endulzamiento de Gas Natural índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Información tecnológica

versão On-line ISSN 0718-0764

Resumo

LISPERGUER, J. H  e  BECKER, P. H. Thermal Analysis and Adhesive Properties of Phenol-Resorcinol-Formaldehyde Resins. Inf. tecnol. [online]. 2005, vol.16, n.6, pp.27-31. ISSN 0718-0764.  http://dx.doi.org/10.4067/S0718-07642005000600005.

A study is presented on the relation between thermal curing characteristics and adhesive properties of two laboratory-synthesized phenol-resorcinol-formaldehyde resins (PRF) having different resorcinol contents. Resin curing was evaluated using differential scanning calorimetry (DSC), and adhesive properties were tested in laminated Pinus radiata beams impregnated with copper, chromium, and arsenic (CCA) salts. The PRF resins having the higher resorcinol content (25%) showed a single exothermic peak at 94°C, and its adhesive joints showed high resistance to traction and delaminating tests. Resin with lower resorcinol content (15%) showed a double exothermic peak at 99°C and 158°C, with good traction resistance but low resistance in delaminating tests, showing values over the 5% limit required by the norm.

Palavras-chave : strength of materials; adhesive resins; phenol-resorcinol-formaldehyde; thermal analysis.

        · resumo em Espanhol     · texto em Espanhol

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons