SciELO - Scientific Electronic Library Online

 
vol.17 número3Modelado de la Cinética de Secado de la Papaya Chilena (Vasconcellea pubescens)Pretratamiento Enzimático de Expandido de Soja para la Extracción de Aceite con Solvente índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

Compartir


Información tecnológica

versión On-line ISSN 0718-0764

Resumen

OSELLA, Carlos A; SANCHEZ, Hugo D; GONZALEZ, Rolando J  y  DE LA TORRE, María A. Wheat Milling: Comparative Tests between Experimental and Commercial Mills. Inf. tecnol. [online]. 2006, vol.17, n.3, pp.33-39. ISSN 0718-0764.  http://dx.doi.org/10.4067/S0718-07642006000300006.

The objective of the present study was the evaluation of experimental milling at a pilot plant for the production of flours having characteristics similar to those obtained in an industrial process. The physical, chemical, and technological aspects of flours from different wheats, produced by two experimental and one industrial mill were evaluated. The evaluations of the flours were carried out in triplicate and statistically analyzed using a Duncan multiple range test. Differences were found among amylographic and farinographic values, as well as in the chemical compositions of the flours. The alveographic and technological behavior showed not significant  differences (a = 0.05). It is concluded that the diagrams proposed for experimental milling could be used to predict the behavior of flour in industrial mivdroppelmann@unab.cllling .

Palabras clave : wheat milling; flour characteristics; Duncan test; statistical analysis.

        · resumen en Español     · texto en Español

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons