SciELO - Scientific Electronic Library Online

 
vol.17 número4Comparación de Deformaciones de un Aforador Determinadas por Simulación del Proceso de Inyección con Valores del Proceso RealApoyo a la Seguridad Industrial con Programación Meta índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

Compartir


Información tecnológica

versión On-line ISSN 0718-0764

Resumen

LOPEZ, Francisco; BASELGA, Juan  y  BRAVO, Julio. Use of CAE Tools to Determine Critical Dimensions of Lenses Processed by Plastic Injection. Inf. tecnol. [online]. 2006, vol.17, n.4, pp.59-63. ISSN 0718-0764.  http://dx.doi.org/10.4067/S0718-07642006000400011.

C-MOLD software (CAE tools, Computational Assistant Engineering) has been used to simulate the injection process of biconcave lenses. It has been found that for a given geometry the variables that control de process attain values that are excessively high. Lenses of 50 mm in diameter and very different thickness have been designed and a relationship between the geometrical parameters (thickness and curvature) and the process variables (maximum injection pressure and temperature difference at the end of injection) has been established. From the plots of the process variables against the geometrical parameters it has been possible to obtain the critical values of the geometrical parameters: 2,2 mm for the edge thickness, 0.75 mm for sagitta, 420 mm for the curvature radius and 0,4 mm for the thickness at the center of the lens.

Palabras clave : injection; plastics; critical dimensions; CAE tools; C-MOLD..

        · resumen en Español     · texto en Español

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons