SciELO - Scientific Electronic Library Online

 
vol.17 número5Posicionamiento de Robots Móviles mediante un Filtro de Kalman Angular y TriangulaciónEstudio del Efecto de la Altitud sobre el Comportamiento de Motores de Combustión Interna. Parte 1: Funcionamiento índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Información tecnológica

versão On-line ISSN 0718-0764

Resumo

DURAN, Orlando M  e  BAVESTRELLO, Italo. Cutting Conditions Definition Using an Approach Based on Fuzzy Logic. Inf. tecnol. [online]. 2006, vol.17, n.5, pp.15-20. ISSN 0718-0764.  http://dx.doi.org/10.4067/S0718-07642006000500004.

This study presents a model to optimize the selection of cutting parameters in  drilling operations. The model developed, based on fuzzy logic techniques, considers as input data characteristics such as workpiece hardness, cutting tool type, and also the condition of the machine-tool. Then the fuzzy sets were specified, in reference to input and output data of the model, type of function applicable, and the appropriate defuzzification method. An adjustment mechanism to handle situations where the recommended ranges of cutting conditions overlap, is proposed. The results showed that the model constructed  behaved as expected, and that the fuzzy logic was useful in the definition of the cutting parameters when there was no conclusive  information on certain characteristics of the process.

Palavras-chave : machining; drilling model; fuzzy logic; cutting parameters.

        · resumo em Espanhol     · texto em Espanhol

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons