SciELO - Scientific Electronic Library Online

 
vol.22 issue1Application of an Evolutionary Algorithm to solve Job Shop-Open Shop ProblemsA New Method to Improve the Production Process of Boric Acid author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

Share


Información tecnológica

On-line version ISSN 0718-0764

Abstract

MORAN, Oscar D; KUNNING, Federico G  and  CUELLO, José A. Implementation on the CXN-I Anthropomorphic Robot of a Straight Line Kinematic Control. Inf. tecnol. [online]. 2011, vol.22, n.1, pp.93-100. ISSN 0718-0764.  http://dx.doi.org/10.4067/S0718-07642011000100012.

The purpose of this work was to implement the kinematic control of the CXN-I robot so it follows a straight line trajectory, controlling both acceleration and speed along it. A linear segment with parabolic transitions interpolator is applied to the line defined by the requested points. This curve is sampled and the joints coordinates obtained through the inverse kinematic equations are then connected using a cubic polynomial interpolator. The references for the control system obtained from these curves are entered into a computer model of the robot, obtaining the cartesian coordinates of the real and ideal trajectory. Based on the results, it is concluded that the implementation of the proposed control was successfully achieved and that this method could be extended to other types of trajectories and robots.

Keywords : robot; anthropomorphic; kinematic control; trajectories; robot CXN-I.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License