SciELO - Scientific Electronic Library Online

 
vol.22 número4Estudio de Propiedades Físicas y Viscoelásticas de Panes Elaborados con Mezclas de Harinas de Trigo y de Arroz IntegralEvaluación de Parámetros de Rugosidad usando Análisis de Imágenes de Diferentes Microscopios Ópticos y Electrónicos índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

Compartir


Información tecnológica

versión On-line ISSN 0718-0764

Resumen

FUEYO, José G; DOMINGUEZ, Manuel  y  CABEZAS, José A. Performance of Dowel-Type Joints of the Glued in Rod Type using Finite Elements . Inf. tecnol. [online]. 2011, vol.22, n.4, pp.117-128. ISSN 0718-0764.  http://dx.doi.org/10.4067/S0718-07642011000400013.

A study on wood-steel joints used in timber structures with emphasis on the, glued in rod type, is presented. The performance of these joints with and without adhesive where compared and the results from these studies were analyzed in three different ways; i) using the analytical equations applied in the official standards and in the literature; ii) using the finite element method technique; and iii) making empiric tests of the same proposed designs used in the two previous methodologies. To use the finite element method, different parametric models were prepared, which could include all the possible variations of the variables which affect the joint performance. The results allowed determining how the modification of the variables studied affects the performance in each case.

Palabras clave : joints; timbe structures; glued in rods; finite elements.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons