SciELO - Scientific Electronic Library Online

 
vol.27 número2Acetilación de Aminas Alifáticas y Aromáticas: Estudio TeóricoSupervisión y Control Industrial a través de Teléfonos Inteligentes usando un Computador de Placa Única Raspberry Pi índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Información tecnológica

versión On-line ISSN 0718-0764

Resumen

HOOSE, Anderson; CONSALTER, Luiz A  y  DURAN, Orlando M. Implementation of a Hybrid System of the type Constant Work In Progress (CONWIP) for the Production Control in a Manufacturing Plant of Agriculture Machine Parts. Inf. tecnol. [online]. 2016, vol.27, n.2, pp.111-120. ISSN 0718-0764.  http://dx.doi.org/10.4067/S0718-07642016000200014.

This study addresses the practical application of a Hybrid System of Production Control in the manufacturing process of machine parts in an industry of agricultural machine part industry. In the proposal, the production planning section send and work order to the manufacturing section where the first step in the production chain starts. Once the hybrid system for the production control was implemented, its effects were registered and analyzed during the next seven consecutive months. The results were compared with the seven months just before the date of implementation. It was noticed after the study that there was an increase in the number of parts produced and sold. It was also observed that there was better supply of the weld lines and higher utilization of those machines that face restrictions regarding to the lack of raw material, quality problems, and increments of requests and a reduction of bottlenecks in the production lines. As a main conclusion it can be highlighted the enhancement of the line efficiency in terms of the synchronization between demand and production levels.

Palabras clave : production control; work in process; machine manufacturing; CONWIP.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons