SciELO - Scientific Electronic Library Online

 
vol.5 número1CARACTERIZACION MECÁNICA DE MADERA RECONSTITUIDA: MÓDULO DE ELASTICIDAD DE TABLEROS DE PARTÍCULAS DE MADERA EVALUADO CON MÉTODOS NO DESTRUCTIVOS índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Maderas. Ciencia y tecnología

versão On-line ISSN 0718-221X

Resumo

TADEU MASCIA, Nilson. CONCERNING THE ELASTIC ORTHOTROPIC MODEL APPLIED TO WOOD ELASTIC PROPERTIES. Maderas, Cienc. tecnol. [online]. 2003, vol.5, n.1, pp.03-19. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2003000100001.

Among the construction materials, wood reveals an orthotropic pattern, because of unique characteristics in its internal structure with three axes of wood biological directions (longitudinal, tangential and radial). elastic symmetry: longitudinal, tangential and radial, reveals an orthotropic pattern. The effect of grain angle orientation onin the elastic modulus constitutes the fundamental cause forof wood anisotropy. It is responsible for the greatest changes in the values of the constitutive tensor components, and, thus in the elastic constant values of wood. The goal of this article is to verify the adequacy of the orthotropic model for wood, basically expressed by the modulus of elasticity Ei related to a determined direction. It was considered a cCoordinate transformation between the materials axes (L, R and T) and Euler′s angles is considered to use a constitutive equation for orthotropic materials. The main purpose of this analysis is to theoretically explore the coordinate transformation in the three - dimensional point of view and also to statistically compare the results of modulus of elasticity from compression test in a Brazilian wood species, Guapuruvú (Schizolobium parahyba), with values obtained from a theoretical expression. The results from the analysis, in which the coefficient of determination (R-sq) was equal to 0.965 for a linear least squares analysis, showed that the orthotropic model is adequate to be applied

Palavras-chave : Modulus of Elasticity of Wood; Compression Test; Orthotropic Material.

        · resumo em Espanhol     · texto em Inglês

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons