SciELO - Scientific Electronic Library Online

 
vol.13 número3Runoff characteristics in forest plots before and after wood ash fertilizationLignocellulosic composites from Brazilian giant bamboo (Guadua magna): Part 2: Properties of cement and gypsum bonded particleboards índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Maderas. Ciencia y tecnología

versão On-line ISSN 0718-221X

Resumo

EL MOURIDI, Mohammed et al. Searching for material symmetries in the burr wood of thuja by a direct contact ultrasonic method on spherical samples. Maderas, Cienc. tecnol. [online]. 2011, vol.13, n.3, pp.285-296. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2011000300004.

This work is part of a program that aims at studying the burr wood of thuja (Tetraclinis articulata). The goal of this work is to identify material symmetries of burr wood to improve its machining. To have a sufficient number of data and to limit the variability between samples, an ultrasonic experimental device, in direct contact on spherical samples, has been developed and improved. Until now, the geometry used in direct contact ultrasonic methods was either cubic or polyhedral allowing to obtain, on the same sample, 3 (cube) to 13 (polyhedron) measurements or usable data. By choosing a reasonable angular gap, the spherical geometry allows the ultrasonic velocity to be measured in 133 different directions on the same specimen. We present here the adaptation and development of the ultrasonic experimental device and results obtained on (i) aluminum chosen as a reference material, (ii) beech wood and (iii) burr wood of thuja.

Palavras-chave : Material symmetry; ultrasonic method; direct contact; sphere; burr; wood; thuja; beech.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons