SciELO - Scientific Electronic Library Online

 
vol.14 número2Preservación de madera tratada con Zn y Mn y efectividad de tratamiento antilixiviante con bóraxWettability and surface roughness characteristics of medium density fiberboard panels from rhododendron (Rhododendron ponticum) biomass índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Maderas. Ciencia y tecnología

versão On-line ISSN 0718-221X

Resumo

AGUILERA, Alfredo  e  FERNANDEZ, Christopher. Jointing knives and tool wear effect in the surface quality of radiata pine moldings. Maderas, Cienc. tecnol. [online]. 2012, vol.14, n.2, pp.175-184. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2012000200005.

The effect exerted by the land of jointing of high speed steel knives is studied on the surface quality of radiata pine solid moldings. Fuzzy grain and torn grain are analyzed on flat molding profile. To evaluate these defects, the relationship land of jointing - surface quality was assessed through two procedures, on the first the jointing was done systematically, and on the second only once, early in the process. The results indicate that fuzzy grain and torn grain are related to cutting distance and jointing process, the quality of the cutting material and operating conditions must be taken into account because of these factors depends the process performance as well.

Palavras-chave : Fuzzy grain; torn grain; jointing; radiata pine.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons