SciELO - Scientific Electronic Library Online

 
vol.16 número1Determinación experimental de valores característicos de resistencia para Guadua angustifoliaSome mechanical properties of plywood produced from eucalyptus, beech, and poplar veneer índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Maderas. Ciencia y tecnología

versión On-line ISSN 0718-221X

Resumen

GUNTEKIN, Ergun; OZKAN, Serhat  y  YILMAZ, Tugba. Prediction of bending properties for beech lumber using stress wave method. Maderas, Cienc. tecnol. [online]. 2014, vol.16, n.1, pp.93-98.  Epub 25-Nov-2013. ISSN 0718-221X.

In this study; bending properties of beech wood (Fagus orientalis) were predicted using stress - wave method and compared with static bending tests. First, lumbers which were different in length and cross section were weighed and dimensions were measured. Then, moisture contents were obtained via moisture meter. By using the density, moisture, and dimensions of the samples in MTG Timber Grader device, dynamic modulus of elasticity values were determined. And then, samples were subjected to 3 point bending test. Modulus of elasticity and bending strengths were calculated using load - deformation curves. Regression models were developed to interpret relationships between dynamic modulus elasticity and bending properties. Results showed that there is a high regression coefficient (0,86) between dynamic modulus of elasticity and static modulus of elasticity. Regression coefficient between dynamic modulus of elasticity and static bending strength was measured as (0,72) and regression coefficient between static modulus of elasticity and static bending strength was measured as (0,74). Results indicate that bending properties of beech wood lumber can be predicted using stress wave method.

Palabras clave : Fagus orientalis; bending properties; stress wave.

        · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons