SciELO - Scientific Electronic Library Online

vol.16 número2Free shrinkage of wood determined at the cellular level using an environmental scanning electron microscopEAnalysis of rigidity loss and deterioration from exposure in a decay test field of thermorectificated Eucalyptus grandis wood índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados




Links relacionados


Maderas. Ciencia y tecnología

versão On-line ISSN 0718-221X


PORANKIEWICZ, Bolesław  e  GOLI, Giacomo. Cutting forces by Oak and Douglas fir machining. Maderas, Cienc. tecnol. [online]. 2014, vol.16, n.2, pp.199-216.  Epub 25-Mar-2014. ISSN 0718-221X.

In this work the multi-factor, non-linear dependencies between main (tangential) FC and normal (radial) FN cutting forces upon two machining parameters by up-routing and down-routing wood of Douglas fir (Pseudotsuga Menziesii) and Oak (Quercus petraea) were evaluated. The relationships are graphically illustrated and discussed.  The obtained data were compared with cutting forces evolution models according to grain orientation from the literature in order to verify if literature statements or models comply with measured data. Evidence of several contradictions was found relative to results from available literature.

Palavras-chave : Grain orientation; multi-factor non-linear statistical dependencies; cutting force; routing.

        · texto em Inglês     · Inglês ( pdf )


Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons