SciELO - Scientific Electronic Library Online

 
vol.16 número4Predicting the young’s modulus of defect free radiata pine shooks in finger-jointing using resonance frequencyColor stability of weathered heat-treated teak wood índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Maderas. Ciencia y tecnología

versão On-line ISSN 0718-221X

Resumo

AYDIN, Ismail. Effects of veneer drying at high temperature and chemical treatments on equilibrium moisture content of plywood. Maderas, Cienc. tecnol. [online]. 2014, vol.16, n.4, pp.445-452.  Epub 21-Ago-2014. ISSN 0718-221X.

Moisture content (MC) is one of the most important factors that can affect many physical and mechanical properties of wood and veneers. MC strongly affects the final strength and durability of joints, development of surface checks in the wood and dimensional stability of the bonded assembly. In this study, plywood panels made from Alnus glutinosa (alder), Fagus orientalis (beech) and Picea orientalis (spruce) wood veneers were treated with ammonium acetate, borax and boric acid by using dipping method to test for their equilibrium moisture content (EMC). Borax and boric acid solutions were used for fire-retardancy, and ammonium acetate for reducing formaldehyde emission. Two different veneer drying temperatures (20oC and 180oC) were used to reveal the effects of veneer drying at high temperature on the hygroscopicity of plywood panels. EMC values of alder, beech and spruce panels decreased significantly with veneer drying at high temperature. Picea orientalis (spruce) plywood panels had the highest EMC values and followed by Alnus glutinosa (alder) and Fagus orientalis (beech) panels. EMC values of plywood panels increased significantly for both drying temperatures after ammonium acetate, borax and boric acid treatments.

Palavras-chave : Wood; plywood; high temperature drying; impregnation; equilibrium moisture content.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons