SciELO - Scientific Electronic Library Online

 
vol.17 número2Physical and mechanical properties of nanoreinforced particleboard compositesApplication of aqueous two phase systems based on polyethylene glycol and sodium citrate for the recovery of phenolic compounds from Eucalyptus wood índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Maderas. Ciencia y tecnología

versión On-line ISSN 0718-221X

Resumen

VINHA ZANUNCIO, Antônio José et al. Predicting moisture content from basic density and diameter during air drying of Eucalyptus and corymbia logs. Maderas, Cienc. tecnol. [online]. 2015, vol.17, n.2, pp.335-344.  Epub 02-Mar-2015. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2015005000031.

In air drying of Eucalyptus urophylla and Corymbia citriodora logs for the production of charcoal it is necessary to be able to predict when logs have reached the required moisture content of ≤ 35%.This study is aimed to produce models using basic density and diameter to predict the moisture content of Eucalyptus urophylla and Corymbia citriodora logs after 30, 60 and 90 days drying. 1,2 m long logs were taken at three different heights from three C. citriodora trees and three trees each from two E. urophylla clones (VM4 and Mn463). The 27 debarked, end sealed logs were air dried under cover for 90 days during which the change in moisture content was monitored. The relationship between density and drying was analyzed by Pearson’s correlation coefficient and the models for predicting the moisture content based on the basic density and diameter were produced. The density and the drying showed a high correlation coefficient. The coefficient of determination of the models was above 0,89 with a standard error lower than 6%. The use of the density and diameter to estimate the wood moisture content simplifies the production of the models, which can be used for Eucalyptus and Corymbia genetic materials.

Palabras clave : Biomass; drying; wood.

        · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons