SciELO - Scientific Electronic Library Online

 
vol.18 número3Some technological properties of laminated veneer lumber produced with fast-growing Poplar and EucalyptusEffect of extractive content on the thermal stability of two wood species from Brazil índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Maderas. Ciencia y tecnología

versión On-line ISSN 0718-221X

Resumen

BELLEVILLE, Benoit; ASHLEY, Philip  y  OZARSKA, Barbara. Wood planing properties of Australian plantation-grown Eucalypts. Maderas, Cienc. tecnol. [online]. 2016, vol.18, n.3, pp.425-434. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2016005000038.

Planing properties of seven Australian plantation-grown Eucalypts were evaluated to provide recommendations on how these species should be machined and considered for the manufacture of high quality furniture and furnishings. The surface quality produced for each species was evaluated using eight planing conditions. All species performed well producing equivalent or better results than mature traditional furniture species, and could be used for high value furniture manufacturing. Tungsten carbide cutters produced better results than high-speed steel for most Eucalypts and the grinding of a small chip-breaker usually produced improving results as the size of the chip-breaker was reduced. Grain orientation did not affect the planed surfaces for some species but planing with the grain usually produced better surface. Recovery and presence of torn grain could not be related to the wood density.

Palabras clave : Eucalyptus; machining; planning; plantation; surface quality; surface roughness.

        · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons