SciELO - Scientific Electronic Library Online

 
vol.20 número1Effect of nanoclay-treated UF resin on the physical and mechanical properties of plywood manufactured with wood from tropical fast growth plantationsMonitoring the cell wall characteristics of degraded beech wood by white-rot fungi: Anatomical, chemical, and photochemical study índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Maderas. Ciencia y tecnología

versión On-line ISSN 0718-221X

Resumen

AURKOVIA‡, Marija; MLADENOVIA‡, Goran; TANOVIA‡, Ljubodrag  y  DANON, Gradimir. Impact of feed rate, milling depth and tool rake angle in peripheral milling of oak wood on the cutting force. Maderas, Cienc. tecnol. [online]. 2018, vol.20, n.1, pp.25-34. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2018005001301.

The paper presents the results of investigations performed in the peripheral milling of oak wood (Quercus robur), where the impact of cutting regime elements and tool geometry on the cutting force is analyzed. A large-scale experiment was conducted to implement the obtained results in developing a reliable analytical and simulation model for analyzing and predicting the cutting forces, depending on the feed rate, the milling depth and the tool rake angle. The generated mathematical model is adequate and describes accurately enough the dependence of the cutting forces upon the selected impact factors in the adopted test conditions. The evaluation of the model parameters significance indicates a significant impact of feed rate and milling depth, whereas tool rake angle does not show any significant impact in this case. The developed mathematical model can be employed in manufacturing conditions as an indicator of wood and wood-based materials machinability.

Palabras clave : Peripheral milling; cutting forces; cutting regime; tool rake angle; machinability..

        · texto en Inglés     · Inglés ( pdf )