SciELO - Scientific Electronic Library Online

 
vol.20 número3Northeastern United States species treated with copper-based preservatives: Durability in mississippi stake testsPlanting density effect on some properties of Schizolobium parahyba wood índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Maderas. Ciencia y tecnología

versión On-line ISSN 0718-221X

Resumen

CHEN, Ming  y  LYU, Jianhua. Properties of double dowel joints constructed of Medium Density Fiberboard. Maderas, Cienc. tecnol. [online]. 2018, vol.20, n.3, pp.369-380. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2018005003801.

The objective of this study is to determine optimum parameters for double dowels in medium density fiberboard components, and the maximum value of the strength of joints loaded in tension and compression bending. This study analyzes dowel diameter, clearance or interference fit value, and dowel spacing by using the orthogonal experiment method. Optimum parameters for double dowels in medium density fiberboard component structures were obtained by orthogonal experiment and verified by simulation using ANSYS finite element analysis software. Experimental and simulation-based results revealed that the optimal parameters for double dowel joints with maximum tensile strength were a dowel diameter of 10mm, an interference fit of 0,20mm, and a spacing of 64mm.The optimal parameters for double dowel joints with maximum bending strength were a dowel diameter of 10mm, an interference fit of 0,10mm and a spacing of 48mm.

Palabras clave : Finite element analysis, joint parameter, joint strength, mechanical properties; optimization..

        · texto en Inglés     · Inglés ( pdf )