SciELO - Scientific Electronic Library Online

 
vol.21 número1Effects of saturated vapor pre-steaming on drying strain in Asian White Birch: Experimentation and modellingEffectiveness of copper chrome arsenate and used engine oil in protecting fencing posts of Ugandan grown eucalypt clone GC550 and Phoenix reclinata against termite attack índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Maderas. Ciencia y tecnología

versão On-line ISSN 0718-221X

Resumo

TAGHIYARI, Hamid R.  e  AVRAMIDIS, Stavros. Specific gas permeability of normal and nanosilver-impregnated solid wood species as influenced by heat-treatment. Maderas, Cienc. tecnol. [online]. 2019, vol.21, n.1, pp.89-96. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2019005000108.

The effect of heat treatment at 50 and up to 150°C was studied on dowel-shape specimens prepared from beech (Fagus orientalis), poplar (Populus nigra), and fir (Abies alba) wood. Specimens were cut into two diameter sizes (18 and 25 mm) to explore the effect of diameter size on permeability. Separate sets of specimens from each size and species were prepared to be first impregnated with a 200 ppm aqueous nanosilver (NS) suspension to investigate the effect of facilitated heat-transfer on permeability at different temperatures. Specimens were heated in five consecutive steps at 50, 75, 100, 125, and 150(C and for 24 hours in each step. High variance was found in the specific gas permeability between each treatment group, thus indicating probable high fluctuation in settlement of extractives at different spots of a log. Heat treatment only affected gas permeability at the first steps of heating (50 and 75°C), where loss of moisture content resulted in a permeability increase in nearly all species. Consecutive steps of heating up to 150(C did not significantly affect the permeability in either normal or NS-impregnated specimens.

Palavras-chave : Beech; poplar; fir; longitudinal permeability; wood-modification..

        · texto em Inglês     · Inglês ( pdf )