SciELO - Scientific Electronic Library Online

 
vol.21 número2Process layout planning and optimised product range selection in manufacture of wooden construction setsMachining properties of Melia dubia wood índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Maderas. Ciencia y tecnología

versión On-line ISSN 0718-221X

Resumen

HUANG, Yuxiang et al. Surface properties of novel wood-based reinforced composites manufactured from crushed veneers and phenolic resins. Maderas, Cienc. tecnol. [online]. 2019, vol.21, n.2, pp.185-196. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2019005000206.

This study was performed to determine the surface properties of novel wood-based reinforced composites made from poplar veneers and phenolic resins. The veneers with different thickness (1,8; 4; 6; 8 mm) were finely crushed and then were impregnated with phenolic resins to achieve different resin loading (12, 14, 18%). Finally, they were laminated or random paved to manufacture novel wood-based reinforced composites with different target densities (900-1100 kg/m3). With increased veneer thickness or resin content, the hardness of novel wood-based reinforced composites decreased and their roughness increased. The increase of density contributed to the increased hardness and decreased roughness. The surface wettability of novel wood-based reinforced composites appeared to be closely related to their surface roughness. There was a negative correlation between contact angle and roughness. The novel wood-based reinforced composites prepared by laminated mat formation showed higher hardness, lower roughness than those by random mat formation. Such data of surface properties can be applied to design the novel wood-based reinforced composites products with desired quality and provide basic information for further panel processing.

Palabras clave : Hardness; surface energy; surface roughness; surface wettability; wood composites..

        · texto en Inglés     · Inglés ( pdf )