SciELO - Scientific Electronic Library Online

 
vol.21 número2Surface properties of novel wood-based reinforced composites manufactured from crushed veneers and phenolic resinsCharacterization of thermally modified short and long rotation teaks and the effects on coatings performance índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Maderas. Ciencia y tecnología

versión On-line ISSN 0718-221X

Resumen

GUPTA, Sachin; SINGH, C.P.; KISHAN-KUMAR, V.S.  y  SHUKLA, Shikhar. Machining properties of Melia dubia wood. Maderas, Cienc. tecnol. [online]. 2019, vol.21, n.2, pp.197-208. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2019005000207.

In this paper result of working quality of Melia dubia is reported after testing them under six major wood working operations namely - planing, sanding, turning, shaping, boring and mortising based on Indian Standard. The wood performed extremely well under planing. In shaping, the performance was good enough. Though all the other operations yielded poor results, the composite rating factor which is an overall performance indicator was 35 % more than that of Tectona grandis. The ease of working is only 93 % compared to teak. The working quality index which was based on the composite rating factor and ease of working worked out to 107 taking Tectona grandis as 100 mainly because of the high performance under planing and shaping and good performance under sanding.

Palabras clave : Ease factor; planing; sanding; shaping; turning; working quality..

        · texto en Inglés     · Inglés ( pdf )