SciELO - Scientific Electronic Library Online

 
vol.21 número4Energy efficiency performance enhancement of industrial conventional wood drying kiln by adding forced ventilation and waste heat recovery system: A comparative studyRecommendation of non-destructive sampling method for density estimation of the Eucalyptus wood índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Maderas. Ciencia y tecnología

versión On-line ISSN 0718-221X

Resumen

CANTOS, Gabrielle Luisa et al. Investigation of an alternative testing protocol to determine the shear strength of bamboo parallel to the grain. Maderas, Cienc. tecnol. [online]. 2019, vol.21, n.4, pp.559-564. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2019005000411.

The common testing protocol to determine the shear strength of bamboo parallel to grain is ISO 22157 (2004). However, widely documented limitations of this test procedure calls for an alternative testing protocol. This study compared ISO 22157 (2004) (TP1) and 2 alternative testing protocols proposed by Base Bahay (TP2a and 2b) in determining shear strength of bamboo parallel to grain. The study used a local bamboo known as “kawayang tinik” (Bambusa blumeana). Results showed that TP1 produced more pure shear failures at 65% compared to TP2a and TP2b at 55% each. Shear strength values between the three methods were not significantly different, although, TP2b resulted in the lowest coefficient of variation at 18%. Also, TP2b was found to be the most effective in terms of specimen preparation, ease of assembly of testing equipment, and low variability in data.

Palabras clave : Base Bahay; Bambusa blumeana; ISO 22157; kawayang tinik; mechanical properties..

        · texto en Inglés     · Inglés ( pdf )