SciELO - Scientific Electronic Library Online

 
vol.22 número1Mechanical behavior of dowel connection for timber-concrete composite rural bridgesAprovechamiento integral de Eucalyptus globulus en un esquema de biorrefinería en doble etapa índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Maderas. Ciencia y tecnología

versión On-line ISSN 0718-221X

Resumen

YEL, Husnu; CAVDAR, Ayfer Donmez  y  TORUN, Sevda Boran. Effect of press temperature on some properties of cement bonded particleboard. Maderas, Cienc. tecnol. [online]. 2020, vol.22, n.1, pp.83-92. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2020005000108.

It is known that there is a correlation between hydration heat and physico-mechanical properties of wood based cement panels. Cement hydration is affected by many variables, such as chemical composition, water/cement ratio, wood/cement ratio, wood chemical properties, mineral additions and producing conditions. This study mainly aimed to investigate the effects of press temperature on some properties of three-layer cement bonded particleboard made from the particles of spruce (Picea orientalis) and poplar (Populus tremula). For this purpose, a total of 16 experimental board groups with 1200 kg/m3 target density and 1/3 wood-cement ratio were produced at the press temperatures of (20, 30, 40, 50, 60, 70 and 80) °C. As cement curing accelerator, CaCl2 was used at a rate of 5 % (cement weight basis). The physical, mechanical and thermal properties of the boards were determined. The results indicated that the press temperature substantially affected the properties of cement-bonded particleboard depending on the wood species. In the light of this study, the optimum temperatures in producing of cement-bonded particleboard were found as 40 °C for poplar wood and 60 °C for spruce wood.

Palabras clave : Mechanical properties; physical properties; Picea orientalis; Populus tremula; thermal properties.

        · texto en Inglés     · Inglés ( pdf )