SciELO - Scientific Electronic Library Online

 
vol.23 número3Optimización de sistemas simulados a través de técnicas de superficie de respuestaExtracción de información desde la web para identificar acciones de un modelo de dominio en planificación automática índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Ingeniare. Revista chilena de ingeniería

versión On-line ISSN 0718-3305

Resumen

CALA, O. M; MERINO, L; KAFAROV, V  y  SAAVEDRA, J. Evaluation of combustion models for determination of refinery furnaces efficiency. Ingeniare. Rev. chil. ing. [online]. 2015, vol.23, n.3, pp.429-438. ISSN 0718-3305.  http://dx.doi.org/10.4067/S0718-33052015000300012.

The efficiency of combustion in furnaces is the measure of heat released in the flame absorbed by the fluid to be heated and is considered one of the most important variables when conducting studies on processes that occur in continuous process industries. The furnace efficiency is calculated using various mathematical models proposed in the literature; these models vary in complexity depending on the analyzed variables. The models I and II are based on the amount of energy absorbed by the furnace using the heating value, the model III contains variables such as air excess, stack gas temperature and adiabatic flame temperature, meanwhile the model IV contains heating losses in furnace's wall (2%), the stack gas temperature and excess air. In this paper was used computer simulation to evaluate fuel gas mixtures with Lower Heating Values (LHV) between 800 to 2500 Btu/ft3, and they were compared with natural gas and data process; the results show that the combustion characteristics might change by varying the fuel composition. It was also found decreased combustion efficiency due to high hydrogen concentration; on the other hand the adiabatic flame temperature was increased in function of gas composition. Model IV presented in this research allowed evaluating combustion process efficiency using only two variables: stack gas temperature and the excess air.

Palabras clave : Efficiency; refinery gas; combustion; furnaces; fuel gas.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons