SciELO - Scientific Electronic Library Online

 
vol.22 número3Planificación por fases ahora índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

Compartir


Revista ingeniería de construcción

versión On-line ISSN 0718-5073

Resumen

LOPEZ AVILA, Melchor; LARRUA QUEVEDO, Rafael  y  RECAREY MORFA, Carlos. A new system for designing embossments in steel sheets to increase composite slabs shear resistance. Rev. ing. constr. [online]. 2007, vol.22, n.3, pp.145-156. ISSN 0718-5073.  http://dx.doi.org/10.4067/S0718-50732007000300001.

A summary is presented with the main historical background in the analysis of the composite slabs with steel sheets subjected to flexion, as well as of the main methods of design, instrumentation and tests accepted by different International Standards. They fundamental parameters that influence the structural behaviour of the composite slabs are analyzed, and with a numeric study an analytical optimization method of the embossments system, is proposed and implemented in a spread sheet is possible to estimate the shear resistance of open web sheets and by comparing them, is possible to determine the better embossments system to include in a open web sheet with such method. Applying the proposed method a technologically possible embossments system can be obtained with a minimum cost for an industrial line of open web sheets.

Palabras clave : Composite; slabs; embossments; sheet; design.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons