SciELO - Scientific Electronic Library Online

 
vol.16 número5Evaluation of computer methods for biomarker discovery on computational grids índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Electronic Journal of Biotechnology

versión On-line ISSN 0717-3458

Electron. J. Biotechnol. vol.16 no.5 Valparaíso set. 2013

http://dx.doi.org/10.2225/vol16-issue5-fulltext-5 

  Molecular Biology and Genetics
Electronic Journal of Biotechnology ISSN: 0717-3458 Vol. 16 No. 5, Issue of September 15, 2013
© 2013 by Pontificia Universidad Católica de Valparaíso -- Chile Received February 20, 2013 / Accepted July 10, 2013
DOI: 10.2225/vol16-issue5-fulltext-5  
SHORT COMMUNICATION

A C1069G SNP of the MC4R gene and its association with economic traits in Korean native cattle (brown, brindle, and black)

 

Youngsub Lee1 · Sairom Park1 · Hun Kim1 · Seung Kyu Lee1 · Jin Woo Kim1 · Hak Kyo Lee2 · Dong Kee Jeong3 · Sung Jin Lee*1

1Kangwon National University, College of Animal Life Sciences, ChunCheon, Korea
2Hankyong National University, Department of Biotechnology, Anseung, Korea
3Jeju National University, Department of Biotechnology, Jeju, Korea

*Corresponding author: sjlee@kangwon.ac.kr

Financial support: This work was supported by a grant from the Next-Generation BioGreen 21 Program (PJ008196, PJ008028), Rural Development Administration, Republic of Korea.

Keywords: economic trait, marbling scores, MC4R gene, PCR-RFLP, SNP.

Abstract

Background: The melanocortin-4 receptor gene (MC4R) plays an important role in regulating food intake and body weight in mammals. In the present study, we identified the MC4R gene in native Korean brown, brindle, and black cattle by polymerase chain reaction restriction fragment length polymorphism (PCR-RFLP), and investigated its association with economic traits. A total of 413 cattle from the three breeds were tested for backfat thickness, carcass weight, longissimus muscle area, and marbling score, and statistical data were analyzed using the SAS program.

Results: The C allele had the highest frequency in brown and brindle cattle, and the G allele frequency was highest in black cattle. The C1069G SNP was significantly (p < 0.05) associated with only marbling scores in brown and brindle cattle but no significant association was detected between the marbling scores and polymorphism in black cattle.

Conclusions: These results suggest that a C1069G SNP of the MC4R gene may be useful as a genetic marker for marbling scores in Korean brown and brindle cattle.

Introduction

The native breeds of Korean cattle are the brown, black, and brindle. Brown (also called Hanwoo) is the main breed with the other two breeds having endangered status. Various conservation and research initiatives have been initiated to ensure a stable population of these two endangered breeds with attention now focused on the Korean cattle industry. All three breeds are beef cattle and thus carcass traits, including marbling score, are considered critical economic traits. To satisfy consumer demand, genetic and molecular techniques have been applied to native cattle for the production of better-quality beef (Chung and Kim, 2005).

Genetic improvement has long been considered an important factor for the competitiveness of beef cattle production. Gene or marker-assisted selection (MAS) is a promising strategy for the genetic improvement of economically important quantitative traits, such as growth and carcass traits in beef cattle (Dekkers, 2004). The identification of genes or polymorphisms highlighting quantitative traits, which are involved in different phenotypes, and an understanding of how these genes/polymorphisms interact with the environment or with other genes affecting economic traits, might be the key to successful application of MAS to the commercial animal population.

As one of those economic traits, marbling in inter-muscular fat gives meat flavour and tenderness. Therefore, an increase in the degree of marbling raises the meat quality (Cheong et al. 2007). In some countries, research is ongoing to determine the association of candidate genes with growth and economic traits in different species. Also the development of DNA markers for genetic breeding is currently a research topic, and attempts to identify the relationship between meat quality traits (intramuscular fat, tenderness, meat and fat colour) and quantitative trait loci (QTL) are proceeding in various countries (Van Eenennaam et al. 2007; Solberg et al. 2008).

Phenotypic expressions of economic traits are controlled by many genes and the melanocortin-4 receptor gene (MC4R) is believed to be one of them. The gene is a type of G-protein-coupled membrane receptor. It regulates both food intake and energy expenditure (Huszar et al. 1997), and it is also known to be a representative gene for the obesity response to the leptin hormone in vertebrates, including humans (Farooqi et al. 2003)

In this study, we performed using the SNP C1069G which is a missense mutation that replaced Leu with Val at the position identical to amino acid 286 of bovine MC4R protein. Many scientists have reported relationships between the MC4R gene and phenotypic traits in cattle breeds. However, the results obtained have contradicted each other in many cases (Haegeman et al. 2001; Thue et al. 2001; Óvilo et al. 2006; Meng et al. 2010; McLean and Schmutz, 2011). Polymorphism of the MC4R gene is associated with economic (carcass weight, backfat thickness, and marbling) and growth traits (birth weight, average daily gain) in Chinese Qinchuan and Nanyang cattle (Zhang et al. 2009; Liu et al. 2010). An association between backfat thickness and the MC4R gene has been reported in Korean brown cattle (Seong et al. 2012). However, this gene has not been reported to be associated with other economic traits in black and brindle cattle. Therefore, this is the first study describing the relationship between the MC4R gene and economic traits in Korean black and brindle cattle.

Materials and Methods

Animals

Three different Korean native cattle breeds, including brown (n = 281), brindle (n = 111), and black (n = 21), were slaughtered at ages between 24 and 36 months. Databases for four carcass traits (carcass weight [CW], longissimus muscle area [LMA], backfat thickness [BF], and marbling score [MS]) were obtained from the Korea Institute for Animal Products Quality Evaluation (KAPE) and used for the comparative analysis of economic traits.

DNA extraction

Genomic DNA was extracted from 25 mg Hanwoo beef samples using i- genomic CTB DNA Extraction Mini Kit (Intron Biotechnology, Inc., Sungnam, Korea). DNA concentration and purity (A260/A280 ratio) for each sample was assessed using a NanoDrop 2000 spectrophotometer (Thermo Scientific, Waltham, MA, USA). The measured DNA samples were stored at -80ºC until further analysis.

PCR-RFLP genotyping

Genotyping for the MC4R polymorphism (SNP C1069G) was performed using a polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) method, with primers (5’-TGACTCGGTGATCTGTAGC-3’, 5’-TTCACTCCATGCCCTACA-3’), as described by Liu et al. (2010). The PCR was carried out in a 20 µL reaction volume, containing 0.25 µL each primer (10 pmol/mL), 20 ng ovine genomic DNA, and 1.5 µL 10X PCR buffer containing 15 mM MgCl2/mL and 5U Taq DNA polymerase (Applied Bio systems, USA).

The PCR conditions were carried out at 94ºC for 5 min and 35 cycles of 30 sec at 94ºC, 30 sec at 55ºC, 30 sec at 72ºC, and a final step of 10 min at 72ºC using the GeneAmp® PCR system 9700 (Applied Bio systems, Foster city, CA, USA). To genotype the MC4R gene, PCR products were digested directly with TaiΙ (Fermentas, Burlington, Canada) in accordance with the manual and then subjected to electrophoresis on a 2% agarose gel stained with ethidium bromide. The banding patterns could be divided into three genotypes CC, CG, and GG (Figure 1).

Statistical analysis

Allele and genotype frequencies were calculated by the simple allele counting method. The correlation analysis was tested by comparing expected and observed genotype frequencies using Cervus v2.0 (Marshall et al. 1998). The association between the genotypes of MC4R candidate genes and economic traits was evaluated using the least squares method (GLM procedure of the SAS v9.2 package; SAS Institute, USA). The statistical model was as follows:

Yij= µ + Gi + Maj + εij

[Equation 1]

where Yij is the carcass trait, µ is the whole average for each trait, Gi is the effect of genotype, Maj is the regression variable for measured age, and εij is a random error effect for each observation.

Results and Discussion

The observed genotype and allele frequencies for the SNP C1069G of the MC4R gene are shown in Table 1. In the brown cattle breed, the PCR-RFLP analysis for the SNP indicated that the frequency of alleles C and G were 0.532 and 0.468, and those of genotypes CC, CG, and GG were 0.271, 0.523, and 0.206, respectively. Similarly in brindle cattle, the frequencies were 0.513, 0.487, 0.216, 0.595, and 0.189 for the C and G alleles and the CC, CG, and GG genotypes, respectively. However, the CC genotype did not appear in black cattle, in which only the CG (0.714) and GG (0.286) genotypes were obtained (Table 1). In a previous study, Qinchuan cattle exhibited a higher CG genotype frequency (0.54) than the CC (0.28) and GG (0.18) genotypes (Liu et al. 2010). In a previous study of Korean cattle (brown), the genotype frequencies had almost the same pattern (0.42, 0.19, and 0.39 for the CG, CC, and GG genotypes, respectively) (Seong et al. 2012).

Table 2 presents the effects of the SNP C1069G on carcass weight, longissimus muscle area, back fat thickness, and marbling score. The SNP in brown (p < 0.05) and brindle (p < 0.01) cattle were significantly associated with marbling score. For brown cattle in particular, the mean value of the marbling score was higher in the CC genotype (6.24) than the CG (5.57) and GG (4.93) genotypes. In brindle cattle, the CC genotype also had a better marbling score (5.67) than the CG and GG genotypes (4.05, 3.48 respectively). However, there were no significant associations with any economic traits in black cattle. These results differed from a study by Seong et al. (2012) which demonstrated that the SNP had a significant influence on backfat thickness in 57 head of Korean brown cattle (p < 0.01) but was not significantly related to marbling score. However, number of samples in the previous experiment was much lower than the sample number in the present experiment; using of large sample number increases the accuracy of the result (Seong et al. 2012). Therefore, the present result has more reliability than the observation of Seong et al. (2012).

So far, to the best of our knowledge, no experiment has been carried to find out the association between MC4R gene and economic traits in the Brindle cattle. These findings might help to setup the selection criteria for Brindle cattle as well as other two types of Korean cattle to improve economic their traits. In conclusion, the SNP C1069G of the MC4R gene is significantly associated with marbling score in Korean brown and brindle cattle. Our results provide evidence that the MC4R gene may affect the economic traits of bovine breeds. Further work is necessary to use the SNP for MAS in a large population.

References

CHEONG, H.S.; YOON, D.; KIM, L.H.; PARK, B.L.; LEE, H.W.; HAN, C.S.; KIM, E.M.; CHO, H.; CHUNG, E.R.; CHEONG, I. and SHIN, H.D. (2007). Titin-cap (TCAP) polymorphisms associated with marbling score of beef. Meat Science, vol. 77, no. 2, p. 257-263. [CrossRef]         [ Links ]

CHUNG, E.R. and KIM, W.T. (2005). Association of SNP marker in IGF-I and MYF5 candidate genes with growth traits in Korean cattle. Asian-Australasian Journal of Animal Science, vol. 18, no. 8, p. 1061-1065.         [ Links ]

DEKKERS, J.C.M. (2004). Commercial application of marker- and gene assisted selection in livestock: Stategies and lessons. Journal of Animal Science, vol. 82, no. 1, p. 313-328.         [ Links ]

FAROOQI, I.S.; KEOGH, J.M.; YEO, G.S.H.; LANK, E.J.; CHEETHAM, T. and O'RAHILLY, S. (2003). Clinical spectrum of obesity and mutations in the melanocortin 4 receptor gene. New England Journal of Medicine, vol. 348, no. 12, p. 1085-1095. [CrossRef]         [ Links ]

HAEGEMAN, A.; COOPMAN, F.; JACOBS, K.; MATTHEEUWS, M.; VAN ZEVEREN, A. and PEELMAN, L. (2001). Bovine melanocortin receptor 4: Cdna sequence, polymorphisms and mapping. Animal Genetics, vol. 32, no. 4, p. 189-192. [CrossRef]         [ Links ]

HUSZAR, D.; LYNCH, C.A.; FAIRCHILD-HUNTRESS, V.; DUNMORE, J.H.; FANG, Q.; BERKEMEIER, L.R.; GU, W.; KESTERSON, R.A.; BOSTON, B.A.; CONE, R.D.; SMITH, F.J.; CAMPFIELD, L.A.; BURN, P. and LEE, F. (1997). Targeted disruption of the melanocortin-4 receptor results in obesity in mice. Cell, vol. 88, no. 1, p. 131-141. [CrossRef]         [ Links ]

LIU, H.; TIAN, W.; ZAN, L.; WANG, H. and CUI, H. (2010). Mutations of MC4R gene and its association with economic traits in Qinchuan cattle. Molecular Biology Reports, vol. 37, no. 1, p. 535-540. [CrossRef]         [ Links ]

MCLEAN, K.L. and SCHMUTZ, S.M. (2011). Melanocortin 4 receptor polymorphism is associated with carcass fat in beef cattle. Canadian Journal of Animal Science, vol. 91, no. 1, p. 75-79. [CrossRef]         [ Links ]

MENG, H.; GAO, X.; LI, J.Y.; REN, H.Y.; CHEN, J.B. and XU, S.Z. (2010). Polymorphisms in MC4R gene and correlations with economic traits in cattle. Molecular Biology Reports, vol. 37, no. 8, p. 3941-3944. [CrossRef]         [ Links ]

MARSHALL, T.C.; SLATE, J.; KRUUK, L.E.B. and PEMBERTON, J.M. (1998). Statistical confidence for likelihood-based paternity inference in natural populations. Molecular Ecology, vol. 7, no. 5, p. 639-655. [CrossRef]         [ Links ]

ÓVILO, C.; FERNÁNDEZ, A.; RODRÍGUEZ, M.C.; NIETO, M. and SILIÓ, L. (2006). Association of MC4R gene variants with growth, fatness, carcass composition and meat and fat quality traits in heavy pigs. Meat Science, vol. 73, no. 1, p. 42-47. [CrossRef]         [ Links ]

SEONG, J.; SUH, D.S.; PARK, K.D.; LEE, H.K. and KONG, H.S. (2012). Identification and analysis of MC4R polymorphisms and their association with economic traits of Korean cattle (Hanwoo). Molecular Biology Reports, vol. 39, no. 4, p. 3597-3601. [CrossRef]         [ Links ]

SOLBERG, T.R.; SONESSON, A.K.; WOOLLIAMS, J.A. and MEUWISSEN, T.H.E. (2008). Genomic selection using different marker types and densities. Journal of Animal Science, vol. 86, no. 10, p. 2447-2454. [CrossRef]         [ Links ]

THUE, T.D.; SCHMUTZ, S.M. and BUCHANAN, F.C. (2001). A SNP in the cattle MC4R gene is used to map MC4R to BTA 24. Animal Genetics, vol. 32, no. 6, p. 390-391. [CrossRef]         [ Links ]

VAN EENENNAAM, A.L.; LI, J.; THALLMAN, R.M.; QUAAS, R.L.; DIKEMAN, M.E.; GILL, C.A.; FRANKE, D.E. and THOMAS, M.G. (2007). Validation of commercial DNA tests for quantitative beef quality traits. Journal of Animal Science, vol. 85, no. 4, p. 891-900. [CrossRef]         [ Links ]

ZHANG, C.L.; WANG, Y.H.; CHEN, H.; LAN, X.Y.; LEI, C.Z. and FANG, X.T. (2009). Association between variants in the 5’-untranslated region of the bovine MC4R gene and two growth traits in Nanyang cattle. Molecular Biology Reports, vol. 36, no. 7, p. 1839-1843. [CrossRef]         [ Links ]

Note: Electronic Journal of Biotechnology is not responsible if on-line references cited on manuscripts are not available any more after the date of publication.

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons